CUTTING EDGE SAWMILL
Sawmill Blade
Sharpening FAQ
Questions About Your Blades?
Our sawmill blade sharpening FAQ covers sharpening, setting,
pricing, shipping, turnaround times, carbide blades, and preparing
your blades.
We sharpen and set bandsaw blades used on portable and stationary sawmills. We can handle blades up to 3 inches wide. If you’re not sure whether we can sharpen your particular blade, give us a call or text before sending it in.
Yes. Setting is included with sharpening. Each blade is sharpened and then set to help keep the teeth consistent for better cutting performance. You don’t have to pay for sharpening and setting as separate services.
We can sharpen bandsaw sawmill blades up to 3 inches wide using our professional sharpening and setting equipment.
Yes. We can sharpen certain carbide-tipped sawmill blades. Carbide blades require additional time and handling, so pricing starts at a $30 minimum per blade and may vary depending on the blade type and condition. Contact us before sending carbide blades so we can make sure we can service them.
Yes, in many cases. Light rust, sap, and normal buildup usually aren’t a problem. Blades with heavy rust, excessive buildup, or blades that require additional cleaning may have an extra cleaning charge. If a blade is too damaged to sharpen properly, we’ll let you know.
We inspect your blades before sharpening. If we find cracks, broken blades, missing or damaged teeth, or other damage that may keep the blade from performing properly, we’ll let you know. We do not repair broken blades or replace or repair damaged teeth. We won’t perform additional repair work or charge you for repairs without your knowledge.
Common signs include slower cutting, having to push the mill harder, rough or wavy lumber, the blade wandering in the cut, or noticeably dull teeth. It’s usually better to have a blade sharpened before it becomes extremely dull or damaged.
No. Our service focuses on professional blade sharpening and tooth setting. We do not currently offer blade tensioning or blade repair services.
Standard blades 199″ or less are $10 per blade, and blades 200″ or more are $12 per blade. Both sharpening and setting are included in the price. Carbide-tipped blades start at a $30 minimum per blade.
Our standard pricing is based on the overall blade length, not the tooth count. Blades 199″ or less are $10 each, while blades 200″ or more are $12 each.
If you’re not sure of your blade length, check the blade packaging or manufacturer information. You can also contact us before sending your blades.
Yes. We have a 5-blade minimum for blades with the same TPI (teeth per inch). If you’re unsure whether your blades meet the minimum, contact us before shipping or dropping them off.
Blades with heavy rust, sap, or excessive buildup may require additional cleaning, and an extra cleaning fee may apply. We do not repair broken blades or damaged teeth. If we find damage that prevents us from properly sharpening or setting a blade, we’ll let you know.
You don’t need to pay before sending your blades. Once the work is complete, we’ll provide your total for sharpening and setting along with any applicable shipping or cleaning charges. Payment is due before shipped blades are returned. Local customers can pay when picking up their blades.
We accept Venmo, Cash App, PayPal, cash, and check.
Yes. We accept sawmill blades shipped to us from anywhere in the U.S. Pack your blades securely, include your contact information, and ship them directly to our shop in Washburn, Missouri.
Coil your blades carefully and secure the coil so the blades cannot spring open inside the box. Use a sturdy corrugated box with cardboard or other protective material around the blades. Make sure the blades cannot move freely inside the package, and seal all edges of the box securely.
Use the UPS Ground shipping calculator on our Shipping page. Enter your packed box’s weight and dimensions to see an estimated rate using our discounted UPS pricing. Once your box is packed and weighed, you can contact us if you’d like us to create your shipping label.
Yes. Once your blades are packed, contact us with your package weight and dimensions. We can create a prepaid UPS Ground shipping label using our discounted UPS rate and email it to you. You can print the label, attach it to your box, and drop the package off with UPS.
Absolutely. You’re welcome to purchase your own shipping label and send your blades directly to us. You do not have to use our UPS account or discounted rate.
Yes. If you’re nearby, you’re welcome to bring your blades directly to our shop in Washburn, Missouri instead of shipping them. We recommend contacting us before coming by so we can make sure someone is available to receive your blades.
Once your blades are sharpened and set, we’ll package them securely for the trip back to you. Return shipping will be added to your total, and shipped orders must be paid before the blades are sent back.
Please include your name, phone number, email address, and return shipping address with your blades. If there’s anything specific you’d like us to know about the blades, include a short note as well.
We recommend placing this information inside the box, even if it’s already on the shipping label. This helps us quickly match your blades with your contact information when they arrive at our shop.
Once your blades arrive, we’ll identify your order and inspect the blades before getting started. We’ll then professionally sharpen and set each serviceable blade using our Wood-Mizer equipment. Afterward, the blades receive a final check before they’re prepared for pickup or return shipping.
Our typical turnaround time is 1–2 weeks after we receive your blades. Turnaround may vary depending on the number of blades and our current workload. We’ll let you know if we expect your order to take longer.
Yes. If we find a blade that is cracked, broken, has damaged or missing teeth, or has another issue that may prevent us from properly sharpening and setting it, we’ll contact you. We do not repair broken blades or damaged teeth, so we’ll let you know when a blade cannot be serviced.
We’ll contact you when your blades are finished and ready for pickup or return shipping. We’ll also provide your final total, including any applicable cleaning or shipping charges.
Before your blades leave our shop, we’ll make sure the sharpening and tooth set have been completed and give the blades a final check. For shipped orders, we’ll securely package your blades for the trip back to you. Payment is due before shipped blades are returned.
STILL HAVE A QUESTION?
We’re happy to help. Give us a call, send us a message,
or get your blades ready to ship.
